Brake Disc PRO+
No specifications available yet
or .
Complete assembly kit for replacing your brakes. This set is enough for the overall front or rear of the car. The front and rear often consist of other brake discs and brake pads sets. Pay attention to this if you want to provide new brakes for both the front and the rear of your car.
Set consists of:
Outer diameter [mm] | 240,0 |
Fitting Position | Front Axle |
Brake Disc Thickness [mm] | 11 |
Rim Hole Number | 4 |
Brake Disc Type | Solid |
Surface | Painted |
Wear Warning Contact | With acoustic wear warning |
Brake pads | Including |
Weight [kg] | 3,0 | 1,19 |
Height [mm] | 51,5 | 55,5 |
Width [mm] | 131,6 |
Supplementary Article/Supplementary Info | With add-on material |
Thickness/Strength 1 [mm] | 16,8 |
Guarantee | 3 years |
Content | Set (4 brake pads per axle) |
OPEL |
|
---|
FeBi is one of our largest manufacturers in brake discs, brake pads, suspension arms and chassis products.
At FeBi you will find everything for the professional repair of cars, trailers, trailers and vans of all common brands and models. FeBi uses its years of experience, the most modern production technologies and continuously invest in the expansion of its own production.
FeBi distinguishes itself on the following matters from other manufacturers:
- Very wide range of> 30,000 products
- 95% is in stock at Febi and is delivered quickly
- FeBi produces itself and guarantees a high German quality
- Large selection for very recent car models
At the moment we have FeBi products in the following product groups:
- Brake pad sets
- Brake discs
- Gas pressure springs
- Support arms
- Feathers
- Distribution sets
- Filters
- Ignition coils
- Cooling parts (Cooling water flange, hoses)
- Spark plugs
- Steering ball joints and steering rods
- Support arm rubbers
- Wheel bearings
- Sensors
- Electrical parts
FeBi now also supplies its own Pro-kit. The Febi Pro-kit is a complete repair kit and contains all materials to completely replace a repair according to regulations. Handy, because that way you do not have to search all the products together and it always fits.
Expected delivery date:
05-11-2024
Ordered this for the Opel Corsa C Easytronic 2002. Delivered quickly and it fit perfectly, it all went smoothly. Points of attention are 1. Unscrew the cap of the brake fluid reservoir (Do not remove it) 2. Press the piston of the caliper 3. After everything is back in place including the wheel, close the cap of the brake fluid reservoir again 4. press several times on the brake pedal without starting the car until you feel sufficient pressure again.