Brake master cylinder

The master cylinder is also referred to as the heart of the braking system. The cylinder generally consists of a metal tube with 5 holes. The top openings are connected with the brake fluid reservoir. The bottom two openings are connected to the brake lines. The pressure piston is connected at the front.

The main job of the master cylinder is to build up enough brake pressure to move the pistons. These brake pistons can then transfer this pressure to the brake pads, which will be pressed against the brake disc. Due to the enormous friction between the brake pads and the brake disc, the vehicle can brake and eventually come to a stop.

Master cylinder broken

When the master cylinder is broken, you can notice a number of symptoms. The most noticeable symptom is probably the brake pedal feel. The master cylinder supplies the braking system with brake pressure. When the cylinder no longer functions (properly), the pedal feel will change. This feels limp and will have to be pressed much further before braking power is created. Another symptom is decreasing braking power. When a brake cylinder fails, two wheels will be less able to brake or will not be able to brake at all. You will notice reduced braking power as a result. A final symptom is the illumination of the warning light in the dashboard. Modern cars can quickly detect problems in the braking system and indicate a malfunction in the dashboard.

A defective brake cylinder can lead to dangerous situations. The car's brakes are no longer reliable in the event of a faulty master cylinder. Therefore, make sure that the master cylinder is replaced or overhauled as soon as possible.

Overhaul master cylinder

Rubbers are attached to the master cylinder. These rubbers can wear out over time, causing the master cylinder to leak. When a leak occurs in the brake cylinder, you can choose to carry out an overhaul. This means that only the rubbers of the brake cylinder are replaced. These overhaul kits are especially suitable if you own an older car model. For older cars, the supply of new master cylinders is generally scarce. Do you have a more modern car? Then we advise you to replace a leaking brake cylinder in its entirety so that you can move forward for a while.

Buy master cylinder

Buying a new master cylinder is easy and fast at Winparts. Simply enter your number plate on the website and the correct parts for your car will be displayed. Are you looking for other brake system components? In our wide range you will also find wheel brake cylinders, brake calipers, brake drums and brake cleaner.

Fit guarantee, show parts suitable for your vehicle.

Enter your number plate or Manually select.

Brake master cylinder

The brake master cylinder of the car is one of the most important parts in the braking system. The master cylinder ensures that there is pressure on the brake fluid. With this strong oil pressure, the brake pads are then pressed against the brake discs. This creates a strong friction between the brake pads and the brake disc, causing the vehicle to slow down. A defective master cylinder can cause the braking system to malfunction and the braking power to be greatly reduced. Therefore, ensure that you prevent unsafe situations and in the event of a defect, overhaul or replace the cylinder as soon as possible. At Winparts you can easily find the right cylinder with your number plate or car model. Enter these on the website and the correct parts will be displayed.

1 - 20 / 73 Products

Filtered by: Brand: FEBI

Clear all filters

Filter

0 filters selected