Protective Cap/Bellow, shock absorber 36006 FEBI
Fitting Position: Front Axle
Number in packaging: 1
Application: Dust cover
Material: Thermoplast
Outer diameter [mm]: 68
Outer diameter [mm]: 80
Weight [kg]: 0,07
Guarantee: 3 years
or .
The bump stop of the car protects the suspension system from damage. This rubber ensures that the suspension cannot spring too far in the event of a major impact, thus preventing damage or premature wear to the shock absorbers. This suspension is the damping of the car and absorbs the blows caused by, for example, an uneven road surface. The bump stop is mounted on all four shock absorbers of the car, both on the front and rear axle. Check the bump stops regularly for wear or damage and replace them if necessary. At Winparts you will easily find the right bump stops with your license plate or car model. You can easily enter these on the website, the correct car parts will then be displayed.
Fitting Position: Front Axle
Number in packaging: 1
Application: Dust cover
Material: Thermoplast
Outer diameter [mm]: 68
Outer diameter [mm]: 80
Weight [kg]: 0,07
Guarantee: 3 years
Fitting Position: Front Axle
Required quantity: 2
Guarantee: 2 years
Height [mm]: 150
Pairwise replacement is recommended
Fitting Position: Front Axle
Pieces needed: 2
Number in packaging: 1
Application: Rubber stoppers
Material: PU (Polyurethane)
Weight [kg]: 0,085
Guarantee: 3 years
Fitting Position: Rear axle left and right
Pieces needed: 2
Number in packaging: 1
Application: Rubber stoppers
Material: PU (Polyurethane)
Guarantee: 3 years
Thickness [mm]: 127
Weight [kg]: 0,070
Pieces needed: 2
Number in packaging: 2 (set)
Application: Rubber stoppers with dust cover
Weight [kg]: 0,400
Packaging length [cm]: 22
Packaging width [cm]: 11
Packaging height [cm]: 18
Guarantee: 2 years
Guarantee: 5 jaar garantie
Fitting Position: Rear Axle
Required quantity: 2
Guarantee: 2 years
Height [mm]: 154
Pairwise replacement is recommended
Fitting Position: Front Axle
Pieces needed: 2
Number in packaging: 1
Application: Rubber stoppers
Material: Elastomer
Guarantee: 3 years
Thickness [mm]: 65
Weight [kg]: 0,051
Fitting Position: Front Axle
Pieces needed: 2
Number in packaging: 1
Application: Rubber stoppers
Material: PU (Polyurethane)
Weight [kg]: 0,05
Guarantee: 3 years
Length [mm]: 85
Fitting Position: Front Axle
Pieces needed: 2
Number in packaging: 1
Application: Rubber stoppers
Material: PU (Polyurethane)
Weight [kg]: 0,04
Inner diameter [mm]: 18
Guarantee: 3 years
Thickness [mm]: 54
Guarantee: 2 years
Height [mm]: 150
Guarantee: 2 years
Fitting Position: Front Axle
Pieces needed: 2
Number in packaging: 1
Application: Rubber stoppers
Material: PU (Polyurethane)
Guarantee: 3 years
Thickness [mm]: 63
Weight [kg]: 0,09
Fitting Position: Front axle, left and right, Front Axle
Pieces needed: 2
Number in packaging: 1
Application: Dust cover
Material: Elastomer
Inner diameter 1 [mm]: 65,6
Inner diameter 2 [mm]: 100
Guarantee: 3 years
Length [mm]: 133
Weight [kg]: 0,16
Fitting Position: Front Axle
Pieces needed: 2
Number in packaging: 2 (set)
Application: Rubber stoppers with dust cover
Weight [kg]: 0,600
Packaging length [cm]: 9,5
Packaging width [cm]: 30
Packaging height [cm]: 18
Guarantee: 2 years
Guarantee: 5 jaar garantie
Fitting Position: Rear Axle
Material: PU (Polyurethane)
Weight [kg]: 0,63
Guarantee: 2 years
Thickness [mm]: 154
Fitting Position: Front Axle
Guarantee: 2 years
Fitting Position: Rear Axle
Pieces needed: 2
Number in packaging: 1
Application: Dust cover
Material: Elastomer
Inner diameter 1 [mm]: 48
Inner diameter 2 [mm]: 65
Guarantee: 3 years
Length [mm]: 180
Weight [kg]: 0,055
Guarantee: 2 years
Fitting Position: Front Axle
Guarantee: 2 years
Bellows Material: Thermoplast
Fitting Position: Rear Axle
Required quantity: 2
Guarantee: 2 years
Height [mm]: 99
Pairwise replacement is recommended