Back to category
gas spring 179977 FEBI
Product number: 1533118
Manufacturer number: 179977
EAN: 4054224799772
-
Free 30 days exchanges
-
Any part, any car
-
Fast Next day delivery
-
Expert support
Customer service: +31 85 070 52 25
Ask your question at our product specialists.
Questions and answers.
Fit guarantee, show parts suitable for your vehicle.
or .
-
Specifications
Gas spring, trunk
Tip: Replace both gas pressure springs for the best result. You can of course also order them individually.
Gas struts are used to safely and easily open and close the tailgate of a trunk or cargo area. To ensure that the flap does not close by itself, the gas pressure spring must be precisely matched to the weight and position points. Due to the slow release of gas, the gas spring may lose strength over a longer period of use. This not only makes it more difficult to open the tailgate, but is also a safety-relevant factor, because it must be ensured at all times that the tailgate does not close by itself. Febi offers an extensive range of gas pressure springs in the best quality. With a long-term aftermarket partnership with an OE manufacturer, Ferdinand Bilstein opts for consistent premium quality when it comes to gas springs.
- Long lifespan
- Perfect fit
- Strict quality standards
- Meet the requirements of the vehicle manufacturers
Quality from conviction. The gas pressure spring consists of a piston rod and a cylinder. When the tailgate is closed, the piston rod pushes into the cylinder, compressing the gas inside. If the lid opens, the gas turns off again, so that the boot lid remains up. Gas springs can only be fully functional if the gas in the cylinder does not escape.
To guarantee 100% tightness, Febi gas pressure springs are intensively tested. Our certified quality policy tests the gas springs offered for different applications and loads. These concern precise fit, dimensional stability, material quality, tensile strength and hardness.
Eject Force [N] 455 Fitting Position Left and right, both sides Housing Diameter [mm] 22 Piston conrod diameter [mm] 10 Stroke [mm] 248,5 Mounting points diameter [mm] 18 Guarantee 2 years Housing length [mm] 384 Length [mm] 663,5 Weight [kg] 0,2 -
Applicability
PEUGEOT 5008 II 5008 II (MC_, MJ_, MR_, M4_) | 12.2016-11.2019 1.2 (MRHNYH, MRHNYW, MRHNSJ, MRHNSU, MRHNSM) - 1199ccm, 131pk, 96kw - HNY (EB2DTS), HNS (EB2ADTS) 5008 II (MC_, MJ_, MR_, M4_) | 12.2016-11.2019 1.5 BlueHDi 130 (MCYHZJ, MCYHZR, MCYHZX) - 1499ccm, 131pk, 96kw - YHZ (DV5RC) 5008 II (MC_, MJ_, MR_, M4_) | 12.2016-11.2019 1.6 (M45GXV, M45GXW) - 1598ccm, 150pk, 110kw - 5GX (EP6FDTMD) 5008 II (MC_, MJ_, MR_, M4_) | 12.2016-11.2019 1.6 BlueHDi 100 - 1560ccm, 99pk, 73kw - BHY (DV6FD) 5008 II (MC_, MJ_, MR_, M4_) | 12.2016-11.2019 1.6 BlueHDi 115 (MCBHXH, MCBHXW) - 1560ccm, 116pk, 85kw - BHX (DV6FC) 5008 II (MC_, MJ_, MR_, M4_) | 12.2016-11.2019 1.6 BlueHDi 120 - 1560ccm, 120pk, 88kw - BHZ (DV6FC) 5008 II (MC_, MJ_, MR_, M4_) | 12.2016-11.2019 1.6 PureTech 180 - 1598ccm, 181pk, 133kw - 5GF (EP6FADTXD) 5008 II (MC_, MJ_, MR_, M4_) | 12.2016-11.2019 1.6 THP 165 - 1598ccm, 165pk, 121kw - 5GZ (EP6FDT), 5GY (EP6FDTM) 5008 II (MC_, MJ_, MR_, M4_) | 12.2016-11.2019 2.0 BlueHDi 136 - 1997ccm, 136pk, 100kw - AHV (DW10FD), AHS (DW10FD) 5008 II (MC_, MJ_, MR_, M4_) | 12.2016-11.2019 2.0 BlueHDi 150 - 1997ccm, 150pk, 110kw - AHX (DW10FD) 5008 II (MC_, MJ_, MR_, M4_) | 12.2016-11.2019 2.0 BlueHDi 180 - 1997ccm, 181pk, 133kw - AHW (DW10FC) 5008 II (MC_, MJ_, MR_, M4_) | 12.2016-11.2019 2.0 BlueHDi 180 - 1997ccm, 177pk, 130kw - EHZ (DW10FC) 5008 II Van (MC_, MJ_) | 01.2018-??? BlueHDi 130 (MCYHZW, MCYHZR, MCYHZJ) - 1499ccm, 131pk, 96kw - YHZ (DV5RC) 5008 II Van (MC_, MJ_) | 01.2018-??? BlueHDi 180 (MJEHZW) - 1997ccm, 177pk, 130kw - EHZ (DW10FC) -
Original part numbers
98 274 308 80 PEUGEOT 98 124 462 80 PEUGEOT -
Manufacturer
FeBi is one of our largest manufacturers in brake discs, brake pads, bearing arms and chassis products.
FeBi offers everything for the professional repair of cars, trailers, trailers and vans from all current brands and models. FeBi uses her years of experience, state-of-the-art production technologies, and invests continuously in expanding its own production.
FeBi distinguishes itself on the following issues from other manufacturers:
- Very wide range of> 30,000 products
- 95% is in stock at Febi and is therefore delivered quickly
- FeBi produces itself and guarantees a high German quality
- Great offer for very recent car modelsAt the moment we have FeBi products in the following product groups:
- Brake block set
- Brake pads
- Gas pressure springs
- The dragonmen
- springs
- Distribution sets
- Filters
- Bobines
- Cooling parts (Cooling water flanges, hoses)
- spark plugs
- Steering bullets and steering rods
- Support arm rubbers
- Wheel bearings
- Sensors
- Electrical partsFeBi also supplies her own Pro kit today. The Febi Pro Kit is a complete repair kit and contains all materials to fully replace a repair. Handy, because you do not have to find all the products themselves and always fit them.
-
Delivery time
Expected delivery date:
Tomorrow
-
Questions?
Secure payment