Back to category
Drive Shaft 24797 Spidan
Product number: 1355059
Manufacturer number: 24797
EAN: 4019064047971
-
Free 30 days exchanges
-
Any part, any car
-
Shipment within 35 days
-
Expert support
Fit guarantee, show parts suitable for your vehicle.
or .
-
Specifications
Pay attention to the technical original specifications of the
CV joint! Here a rotation angle greater than 50 ° is required!
Fitting Position Front Axle Supplementary Article/Info 2 With screw Number of Bores 6 Outer gearing wheel side 38 Number of Teeth, ABS ring 45 Thread Size M16x1.5 Service exchange part Wheel-side joint diameter [mm] 88 Warranty 2 years Length [mm] 594 O-ring diameter (mm) 60 Hole diameter [mm] 10,2 Diameter ABS ring [mm] 81 Axle body diameter drive side [mm] 82 Wheel bolt pitch [mm] 104 Similar products of other manufacturers
Manufacturer Manufacturer number Price ATI 32166 AUTEX 832164 AUTOTEAM G300051 BORG & BECK BDS1167 CEVAM 5612Z DA SILVA 2239AT DA SILVA JC2239A DEPA 3321655 Dr!ve+ DP2110.10.0050 EAI T78343A1 ESEN SKV 40SKV309 FEBI BILSTEIN 1000505 FRIESEN FDS1059 GSP 203310 INDECO TAU4079 INDECO TAU4079N JPN 40P9035-JPN KAMOKA 5010551 Manufacturer Manufacturer number Price LORO 141-005-247 LPR DS52644 LÖBRO 305069 MAXGEAR 49-1875 NTY NPW-AU-029 ODM-MULTIPARTS 18-211741 POINT GEAR PNG72685 RIDEX 13D0400 RIDEX 13D0400R SAMKO DS52644 SKF VKJC 5506 SNRA A2426 SPIDAN 24797 (this product) STARK SKDS-0210432 STARTCAR 343ST87-45 TRISCAN 8540 295053 TrakMotive 30-0051 -
Applicability
AUDI A4 B6 A4 B6 (8E2) | 11.2000-12.2004 1.8 T quattro - 1781ccm, 170pk, 125kw - AMB, AWM A4 B6 (8E2) | 11.2000-12.2004 1.8 T quattro - 1781ccm, 150pk, 110kw - AVJ A4 B6 (8E2) | 11.2000-12.2004 1.8 T quattro - 1781ccm, 190pk, 140kw - BEX A4 B6 (8E2) | 11.2000-12.2004 1.8 T quattro - 1781ccm, 163pk, 120kw - BFB A4 B6 (8E2) | 11.2000-12.2004 2.0 - 1984ccm, 130pk, 96kw - ALT A4 B6 (8E2) | 11.2000-12.2004 2.0 FSI - 1984ccm, 150pk, 110kw - AWA A4 B6 Avant (8E5) | 04.2001-12.2004 1.8 T quattro - 1781ccm, 190pk, 140kw - BEX A4 B6 Avant (8E5) | 04.2001-12.2004 1.8 T quattro - 1781ccm, 163pk, 120kw - BFB A4 B6 Avant (8E5) | 04.2001-12.2004 2.0 - 1984ccm, 130pk, 96kw - ALT A4 B6 Avant (8E5) | 04.2001-12.2004 2.0 FSI - 1984ccm, 150pk, 110kw - AWA A4 B6 Convertible (8H7) | 04.2002-12.2005 1.8 T quattro - 1781ccm, 163pk, 120kw - BFB A4 B6 Convertible (8H7) | 04.2002-12.2005 2.0 - 1984ccm, 130pk, 96kw - ALT A4 B7 A4 B7 (8EC) | 11.2004-06.2008 1.8 T quattro - 1781ccm, 163pk, 120kw - BFB A4 B7 (8EC) | 11.2004-06.2008 2.0 - 1984ccm, 130pk, 96kw - ALT A4 B7 (8EC) | 11.2004-06.2008 2.0 TDI quattro - 1968ccm, 140pk, 103kw - BPW A4 B7 (8EC) | 11.2004-06.2008 2.0 TDI quattro - 1968ccm, 170pk, 125kw - BRD A4 B7 (8EC) | 11.2004-06.2008 2.0 TDI quattro - 1968ccm, 163pk, 120kw - BVA A4 B7 (8EC) | 11.2004-06.2008 2.0 TFSI quattro - 1984ccm, 200pk, 147kw - BGB, BWE A4 B7 (8EC) | 11.2004-06.2008 2.0 TFSI quattro - 1984ccm, 220pk, 162kw - BUL A4 B7 Avant (8ED) | 11.2004-06.2008 1.8 T quattro - 1781ccm, 163pk, 120kw - BFB A4 B7 Avant (8ED) | 11.2004-06.2008 2.0 - 1984ccm, 130pk, 96kw - ALT A4 B7 Avant (8ED) | 11.2004-06.2008 2.0 TDI quattro - 1968ccm, 140pk, 103kw - BPW A4 B7 Avant (8ED) | 11.2004-06.2008 2.0 TDI quattro - 1968ccm, 170pk, 125kw - BRD A4 B7 Avant (8ED) | 11.2004-06.2008 2.0 TDI quattro - 1968ccm, 163pk, 120kw - BVA A4 B7 Avant (8ED) | 11.2004-06.2008 2.0 TFSI quattro - 1984ccm, 200pk, 147kw - BGB, BWE, BWT A4 B7 Avant (8ED) | 11.2004-06.2008 2.0 TFSI quattro - 1984ccm, 220pk, 162kw - BUL -
Original part numbers
8E0407451QX VW 8E0407451QX AUDI 8E0407451QX SKODA 8E0407271AR AUDI 8E0407271AR SEAT 8E0407271AR VW 8E0407271AR SKODA 8E0407451QX SEAT 8E0407271AR VAG 8E0407451QX VAG -
Manufacturer
Spidan is part of the large GKN Parts. Via Spidan, GKN offers a wide range of drive shafts, steering box covers and CV joints.GKN Automotive is a global leader in eDrive technologies, the architects of an electrified future. The innovation, expertise and global footprint enable GKN to power a sustainable future by delivering eDrive technologies. -
Delivery time
Expected delivery date:
21-11-2026
-
This item is subject to a deposit-return fee. After returning the old part, the deposit-return fee will be fully
refunded.
How does this work?
You return the old part – the part you have disassembled from your car - in the original packaging of the received new part. This ensures that the manufacturer has a clear and immediate understanding which product number it concerns. After the ability to recycle the part (see below for more information) has been checked and approved, the deposit-return fee will be refunded to the same bank account number. The bank account number from which the initial payment had been made.
Which issues do I need to consider?
The manufacturer will evaluate the part if it is applicable to recycling. Is the part broken or otherwise unrepairably damaged, by say a right angle grinder? The manufacturer will not be able to re-use the part and will reject reimbursement. In this case you can’t claim reclamation of the paid deposit-return fee. Naturally, Winparts will not reimburse the fee to you if the manufacturer rejects the old part. Processing time can take up to 2 weeks.
I return the used part, will I receive a new one?
Yes - the housing is often re-used, the part itself is completely new. You’ll have an improved original part with full warranty of the manufacturer. Of course you can count on it that the part meets all kind of rigorous quality checks.
Secure payment