Brake Shoe Set GS8240 TRW
No specifications available yet
Back to category
KW Variant 1 Screw set
Product number: 1032319
Manufacturer number: 10210024
EAN: 4250173300322
-
Free 30 days exchanges
-
Any part, any car
-
Fast delivery
-
Expert support
Customer service: +31 85 070 52 25
Ask your question at our product specialists.
Questions and answers.
Fit guarantee, show parts suitable for your vehicle.
or .
-
Specifications
KW Suspension Variant 1 Screw set
Sporty to use and a fantastic look. With factory pre-configured damping. No difficult adjustment procedure, but immediately the best tuning for your car.
KW propeller sets are high-quality propeller sets that drive more comfortably than cheaper alternatives, while the car is considerably sportier to drive. Tilting and diving are greatly reduced. This is because the dampers are precisely tuned and tested for your car. The steering feel increases as a result and you can better focus the car on the circuit under load.
The V1 screw set has been extensively tested and is adjustable in height. The screw sets are characterized in the following points:
- KW is used in various racing classes
- German quality
- Stainless steel "Inox technology"
- Adjustable reduction
- Approved for public roads, also in Germany
- Including extensive assembly and adjustment instructions
The ideal screw set for street use
With the KW Variant 1 screw set you achieve a maximum reduction in the TÜV-tested adjustment range. The range varies from 30 to 70 mm or 50 to 90 mm depending on the vehicle variant.
Stainless steel
Even after years of use you can easily adjust the height by the patented, dirt-resistant trapezoidal thread with anti-rust treatment (INOX)
Tool kitThis set is delivered including the "KW Tool kit" with assembly and adjustment instructions.
Front axle + rear axle height adjustable (front axle
coil springs, rear axle springs with height adjustment +
dampers).
Not for vehicles with self-leveling control / air suspension.
Material Stainless Steel Suspension Threaded Suspension (height adjustable) Shock Absorber System Not adjustable/adjustable Warranty 2 years reduction for 30-60 mm lowering rear 25-50 mm Adjustable damping No Note (see PDF) 2),8) -
Applicability
AUDI A8 D2 A8 D2 (4D2, 4D8) | 03.1994-09.2002 2.5 TDI - 2496ccm, 150pk, 110kw - AFB, AKN A8 D2 (4D2, 4D8) | 03.1994-09.2002 2.5 TDI - 2496ccm, 180pk, 132kw - AKE A8 D2 (4D2, 4D8) | 03.1994-09.2002 2.5 TDI quattro - 2496ccm, 150pk, 110kw - AFB, AKN A8 D2 (4D2, 4D8) | 03.1994-09.2002 2.5 TDI quattro - 2496ccm, 180pk, 132kw - AKE A8 D2 (4D2, 4D8) | 03.1994-09.2002 2.8 - 2771ccm, 174pk, 128kw - AAH A8 D2 (4D2, 4D8) | 03.1994-09.2002 2.8 - 2771ccm, 193pk, 142kw - ACK, ALG, AMX, APR, AQD A8 D2 (4D2, 4D8) | 03.1994-09.2002 2.8 - 2771ccm, 163pk, 120kw - AEJ A8 D2 (4D2, 4D8) | 03.1994-09.2002 2.8 quattro - 2771ccm, 174pk, 128kw - AAH A8 D2 (4D2, 4D8) | 03.1994-09.2002 2.8 quattro - 2771ccm, 193pk, 142kw - ACK, ALG, AMX, APR, AQD A8 D2 (4D2, 4D8) | 03.1994-09.2002 2.8 quattro - 2771ccm, 163pk, 120kw - AEJ A8 D2 (4D2, 4D8) | 03.1994-09.2002 3.3 TDI quattro - 3328ccm, 224pk, 165kw - AKF A8 D2 (4D2, 4D8) | 03.1994-09.2002 3.7 - 3697ccm, 230pk, 169kw - AEW A8 D2 (4D2, 4D8) | 03.1994-09.2002 3.7 - 3697ccm, 260pk, 191kw - AKC, AQG A8 D2 (4D2, 4D8) | 03.1994-09.2002 3.7 quattro - 3697ccm, 230pk, 169kw - AEW, AKJ A8 D2 (4D2, 4D8) | 03.1994-09.2002 3.7 quattro - 3697ccm, 260pk, 191kw - AKC, AQG A8 D2 (4D2, 4D8) | 03.1994-09.2002 4.2 quattro - 4172ccm, 299pk, 220kw - ABZ, AKG A8 D2 (4D2, 4D8) | 03.1994-09.2002 4.2 quattro - 4172ccm, 245pk, 180kw - AEM A8 D2 (4D2, 4D8) | 03.1994-09.2002 4.2 quattro - 4172ccm, 310pk, 228kw - AQF, AUW, AUX A8 D2 (4D2, 4D8) | 03.1994-09.2002 4.2 quattro - 4172ccm, 238pk, 175kw - ARU A8 D2 (4D2, 4D8) | 03.1994-09.2002 6.0 W12 quattro - 5998ccm, 420pk, 309kw - AZC A8 D2 (4D2, 4D8) | 03.1994-09.2002 S8 quattro - 4172ccm, 340pk, 250kw - AHC, AKH A8 D2 (4D2, 4D8) | 03.1994-09.2002 S8 quattro - 4172ccm, 360pk, 265kw - AQH, AVP, AYS, BCS -
Manufacturer
The German KW suspensions are known for the good quality products.
The propeller sets have been developed specifically for cars , and perfectly balanced for optimum driving behavior.
The KW suspension propeller sets are not only internally superior to most other brands, but also the appearance
is highly corrosion-resistant and durable designed by the use of stainless steel.
The screw sets are delivered including installation and adjustment instructions (toolkit).
Winparts offers the following lines of KW Suspensions:
1. Street comfort : 10-40 mm reduction, damping adjustable
2. Inox-Line V1 : 30-90 mm reduction, solid damping
-
Delivery time
Expected delivery date:
23-07-2026
Secure payment
You recently viewed
-
In stock