Retroreflector (cat's eye)
No specifications available yet
Back to category
KW Variant 1 Screw set
Product number: 1032361
Manufacturer number: 102100AV
EAN: 4250580475446
-
Free 30 days exchanges
-
Any part, any car
-
Fast delivery
-
Expert support
Customer service: +31 85 070 52 25
Ask your question at our product specialists.
Questions and answers.
Fit guarantee, show parts suitable for your vehicle.
or .
-
Specifications
KW Suspension Variant 1 Screw set
Sporty to use and a fantastic look. With factory pre-configured damping. No difficult adjustment procedure, but immediately the best tuning for your car.
KW propeller sets are high-quality propeller sets that drive more comfortably than cheaper alternatives, while the car is considerably sportier to drive. Tilting and diving are greatly reduced. This is because the dampers are precisely tuned and tested for your car. The steering feel increases as a result and you can better focus the car on the circuit under load.
The V1 screw set has been extensively tested and is adjustable in height. The screw sets are characterized in the following points:
- KW is used in various racing classes
- German quality
- Stainless steel "Inox technology"
- Adjustable reduction
- Approved for public roads, also in Germany
- Including extensive assembly and adjustment instructions
The ideal screw set for street use
With the KW Variant 1 screw set you achieve a maximum reduction in the TÜV-tested adjustment range. The range varies from 30 to 70 mm or 50 to 90 mm depending on the vehicle variant.
Stainless steel
Even after years of use you can easily adjust the height by the patented, dirt-resistant trapezoidal thread with anti-rust treatment (INOX)
Tool kitThis set is delivered including the "KW Tool kit" with assembly and adjustment instructions.
This propeller set is intended for vehicles without electronic dampers
Front axle + rear axle height adjustable (front axle
coil springs, rear axle springs with height adjustment +
dampers).
In vehicles with electronic damper control, this must
be switched off. Vehicle-specific kW cut-off kits
you will find it in the accessories list.
Only for vehicles with a front axle with a
shock absorber diameter of 50 mm (not 48.5 mm) /
Spring strut clamp diameter 53 mm.
Material Stainless Steel Suspension Threaded Suspension (height adjustable) For vehicles without electronic suspension control Shock Absorber System Not adjustable/adjustable Warranty 2 years reduction for 40-65 mm lowering rear 40-65 mm axle load -1135 kg rear axle load -1090 kg Adjustable damping No Strut outside diameter [mm] 50 Note (see PDF) 2),37),67),405) -
Applicability
AUDI A4 B9 A4 B9 (8W2, 8WC) | 05.2015-11.2019 1.4 TFSI - 1395ccm, 150pk, 110kw - CVNA A4 B9 (8W2, 8WC) | 05.2015-11.2019 2.0 TDI - 1968ccm, 150pk, 110kw - CZHA, DEUA A4 B9 (8W2, 8WC) | 05.2015-11.2019 2.0 TDI - 1968ccm, 190pk, 140kw - DESA, DETA, DFVA A4 B9 (8W2, 8WC) | 05.2015-11.2019 2.0 TDI - 1968ccm, 136pk, 100kw - DEUB A4 B9 (8W2, 8WC) | 05.2015-11.2019 2.0 TDI - 1968ccm, 122pk, 90kw - DEUC A4 B9 (8W2, 8WC) | 05.2015-11.2019 2.0 TFSI - 1984ccm, 190pk, 140kw - CVKB, DBPA A4 B9 (8W2, 8WC) | 05.2015-11.2019 2.0 TFSI - 1984ccm, 252pk, 185kw - CYRB, CYMC A4 B9 (8W2, 8WC) | 05.2015-11.2019 2.0 TFSI - 1984ccm, 249pk, 183kw - CYRC A4 B9 (8W2, 8WC) | 05.2015-11.2019 3.0 TDI - 2967ccm, 218pk, 160kw - CSWB A4 B9 (8W2, 8WC) | 05.2015-11.2019 30 TDI - 1968ccm, 122pk, 90kw - DEUC A4 B9 (8W2, 8WC) | 05.2015-11.2019 30 TDI Mild Hybrid - 1968ccm, 136pk, 100kw - DEZB, DTNB A4 B9 (8W2, 8WC) | 05.2015-11.2019 35 TDI - 1968ccm, 150pk, 110kw - DEUA A4 B9 (8W2, 8WC) | 05.2015-11.2019 35 TDI Mild Hybrid - 1968ccm, 163pk, 120kw - DEZE, DTNA A4 B9 (8W2, 8WC) | 05.2015-11.2019 35 TFSI Mild Hybrid - 1984ccm, 150pk, 110kw - DLVB, DMSB, CVKC A4 B9 (8W2, 8WC) | 05.2015-11.2019 40 TDI - 1968ccm, 190pk, 140kw - DESA, DETA A4 B9 (8W2, 8WC) | 05.2015-11.2019 40 TFSI Mild Hybrid - 1984ccm, 190pk, 140kw - DEMA, DKYA, DLVA A4 B9 (8W2, 8WC) | 05.2015-11.2019 40 TFSI Mild Hybrid - 1984ccm, 204pk, 150kw - DMSA A4 B9 (8W2, 8WC) | 05.2015-11.2019 45 TFSI Mild Hybrid - 1984ccm, 245pk, 180kw - DKNA A5 A5 (F53, F5P) | 06.2016-08.2020 1.4 TFSI - 1395ccm, 150pk, 110kw - CVNA A5 (F53, F5P) | 06.2016-08.2020 2.0 TDI - 1968ccm, 150pk, 110kw - CZHA, DEUA A5 (F53, F5P) | 06.2016-08.2020 2.0 TDI - 1968ccm, 190pk, 140kw - DESA, DETA A5 (F53, F5P) | 06.2016-08.2020 2.0 TFSI - 1984ccm, 190pk, 140kw - CVKB, DKYA A5 (F53, F5P) | 06.2016-08.2020 2.0 TFSI - 1984ccm, 252pk, 185kw - CYRB A5 (F53, F5P) | 06.2016-08.2020 3.0 TDI - 2967ccm, 218pk, 160kw - CSWB A5 (F53, F5P) | 06.2016-08.2020 30 TDI Mild Hybrid - 1968ccm, 136pk, 100kw - DEZB, DTNB A5 (F53, F5P) | 06.2016-08.2020 35 TDI - 1968ccm, 150pk, 110kw - CZHA, DEUA A5 (F53, F5P) | 06.2016-08.2020 35 TDI - 1968ccm, 163pk, 120kw - DEZE, DTNA A5 (F53, F5P) | 06.2016-08.2020 35 TFSI Mild Hybrid - 1984ccm, 150pk, 110kw - DLVB, DMSB A5 (F53, F5P) | 06.2016-08.2020 40 TDI - 1968ccm, 190pk, 140kw - DESA, DETA A5 (F53, F5P) | 06.2016-08.2020 40 TFSI - 1984ccm, 204pk, 150kw - DMSA A5 (F53, F5P) | 06.2016-08.2020 40 TFSI Mild Hybrid - 1984ccm, 190pk, 140kw - DEMA, DKYA, DLVA, DHDA A5 (F53, F5P) | 06.2016-08.2020 40 TFSI Mild Hybrid - 1984ccm, 204pk, 150kw - DMSA A5 (F53, F5P) | 06.2016-08.2020 45 TFSI Mild Hybrid - 1984ccm, 245pk, 180kw - DKNA -
Manufacturer
The German KW suspensions are known for the good quality products.
The propeller sets have been developed specifically for cars , and perfectly balanced for optimum driving behavior.
The KW suspension propeller sets are not only internally superior to most other brands, but also the appearance
is highly corrosion-resistant and durable designed by the use of stainless steel.
The screw sets are delivered including installation and adjustment instructions (toolkit).
Winparts offers the following lines of KW Suspensions:
1. Street comfort : 10-40 mm reduction, damping adjustable
2. Inox-Line V1 : 30-90 mm reduction, solid damping
-
Delivery time
Expected delivery date:
27-07-2026
Secure payment
