Brake Hose
No specifications available yet
Back to category
ST Suspensions lowering springs
Product number: 0097598
Manufacturer number: 28280074
EAN: 4250173350198
-
Free 30 days exchanges
-
Any part, any car
-
Fast delivery
-
Expert support
Customer service: +31 85 070 52 25
Ask your question at our product specialists.
Questions and answers.
Fit guarantee, show parts suitable for your vehicle.
or .
-
Specifications
ST Suspensions lowering springs
Version: 1,2i 12V-1,6i 16V Lowering (front/rear): 30/30
The ST sport springs are made of silicon-chrome steel in a cold winding process and feature multiple layers and an epoxy finish; these ensure OEM quality and an OEM finish. As a result, they are resistant to all kinds of weather conditions all year round. Depending on the vehicle model, ST sport springs allow for a lowering of approximately 20 mm on the front axle and 15 mm on the rear axle. With some vehicles a much greater lowering is possible. Compared to standard suspensions, the lowering of the center of gravity of the ST sports springs enables much better driving dynamics and handling. In addition, the compression and rebound damping is also lowered, making the car more agile, with fewer rolling movements.
- Spring sets are E-marked and are fully legal and MOT worthy
- Pay attention to vehicles with:
- 4x4 drive (if clearly stated)
- axle load with automatic gearbox and air conditioning
- standard sports suspension oe deduct lowering
- level control/height control
- if you have any questions about this, contact [email protected]
- For cars with torsion springs (Renault/Peugeot, etc.) it concerns a set of 2 springs instead of 4
- Beware of extreme tire size and lowering. In most cases this can be done but at your own risk.
- Delivery time 2-5 working days after order
For vehicles with factory-fitted lowering, the
specified reduction rate reduced by the degree of the
factory lowering.
Not for vehicles with "All Terrain", "Allroad", "Fun" or
"Cross" version, or vehicles for bad roads.
Material Chrome-silicon steel Fitting Position Front Axle Rear Axle Colour Yellow Warranty 2 years Certification TUV & E certification GOCA Not possible Lowering (front/rear) 30/30mm -
Applicability
VOLKSWAGEN POLO IV POLO IV (9N_, 9A_) | 10.2001-11.2009 1.4 - 1390ccm, 83pk, 61kw - BLM POLO IV (9N_, 9A_) | 10.2001-11.2009 1.4 16V - 1390ccm, 75pk, 55kw - AUA, BBY, BKY POLO IV (9N_, 9A_) | 10.2001-11.2009 1.4 16V - 1390ccm, 101pk, 74kw - AUB, BBZ POLO IV (9N_, 9A_) | 10.2001-11.2009 1.4 16V - 1390ccm, 80pk, 59kw - BUD POLO IV (9N_, 9A_) | 10.2001-11.2009 1.4 FSI - 1390ccm, 86pk, 63kw - AXU POLO IV (9N_, 9A_) | 10.2001-11.2009 1.6 16V - 1598ccm, 105pk, 77kw - BTS POLO IV Saloon (9A4, 9A2, 9N2, 9A6) | 09.2002-04.2012 1.4 - 1390ccm, 75pk, 55kw - BBY, BKY POLO IV Saloon (9A4, 9A2, 9N2, 9A6) | 09.2002-04.2012 1.4 - 1390ccm, 101pk, 74kw - BBZ POLO IV Saloon (9A4, 9A2, 9N2, 9A6) | 09.2002-04.2012 1.6 - 1598ccm, 101pk, 74kw - BAH, CCRA, CFZA -
Manufacturer
ST Suspension (formerly WEITEC made by KW) sports springs - TUV approval - E-mark fully MOT worthy - 2 years full warranty. ST Suspensions has many years of experience within the automotive industry and is a well-known name throughout Europe.
Winparts offers the following categories of ST Suspensions:
-
Delivery time
Expected delivery date:
21-05-2026
Secure payment
