Wide range strut bearing & rubber. Order now

Strut bearing broken

Strut bearings have a major influence on the operation of the chassis. If the strut bearings are defective, the braking distance of the car will be much longer. This can create unsafe situations because the car no longer brakes as you are used to. That is why it is important to check the bearings regularly and replace them if necessary. A number of symptoms can indicate broken or worn strut bearings. One symptom is that the car is more difficult to steer and therefore does not stay in its track. This is because the struts are not properly powered. Another symptom of a worn strut bearing is that the car makes a humming or rattling noise on an uneven road surface. This noise is caused by the elasticity of the bearing decreasing over time. The suspension strut will then no longer be properly connected to the body of the car, causing a humming or rattling sound. You can also recognize a worn or broken bearing on the handlebars. Does the car steer heavier, or does it not automatically go to neutral from a bend? Then check whether the bearings are worn or broken.

Replace strut bearing

You can check whether the suspension strut bearing needs to be replaced by placing the car on the bridge. If you can easily move the strut back and forth, the strut bearing is worn. Strut bearings should be replaced every 100,000 kilometers. The life of the bearings are roughly the same as the rest of the car's suspension system. It is therefore important to simultaneously check these parts for wear and replace them if necessary. This way you ensure that the car does not have to be back on the bridge in a short time!

Buy strut bearing

You can easily find the right suspension strut bearings and rubbers for your vehicle with your license plate or car model. You can easily enter this on our website. The suitable car parts will then be displayed. Are you looking for other car parts for the chassis? At Winparts you will also find chassis springs and leaf springs, spring caps, tie rod ends, stabilizer rubbers and ball joints.

Strut mount and rubbers

The car's suspension strut bearing ensures that vibrations and shocks caused by uneven road surfaces cannot be felt in the steering wheel. The bearing is the connection between the shock absorbers and the steering part of the car. The bearing also ensures that the struts are driven and that the car can steer. Strut bearings are therefore an important part of the chassis. At Winparts you will find strut bearings and matching rubbers for the front and rear axle. Easily enter your license plate number or select the car model on the website. The suitable car parts are then displayed.

21 - 40 / 5628 Products

Filter

0 filters selected

Block view
List view

Anti-Friction Bearing, suspension strut support mounting 22498 FEBI

3 1 review

Anti-Friction Bearing, suspension strut support mounting 22498 FEBI

3 1 review

Fitting Position: Front Axle Left, Front axle right (driver side)
Material: Plastic
Material: Metal
Outer diameter [mm]: 111
Inner diameter [mm]: 68
Observe service information
Bearing Type: Anti-friction Bearing
Warranty: 3 years
Thickness [mm]: 27