Looking for crankcase gaskets? Order here

Replacing the sump gasket

You can easily replace the sump gasket yourself. To replace the gasket, you need to be under the car at the sump. You can use a car ramp or a car jack with axle stands. To replace the sump gasket, follow these steps:

First, drain the engine oil from the sump. You do this by unscrewing the oil drain plug and collecting the oil in an oil drain pan.

After the oil is out of the pan, you can loosen the bolts and nuts of the sump.

Then remove the sump. It is possible that it is very tight, in which case you can carefully pry the pan loose with a hammer and screwdriver.

Then you can remove the gasket from the sump.

Then place the new gasket on the sump.

Finally, you can replace the sump with the new gasket under the engine.

Don't forget to refill the engine oil.

Buying a sump gasket

You can find a new sump gasket at Winparts. Enter your registration number or car details on our website and find the right parts easily and quickly. In addition to gaskets for the sump, we also have gaskets for: the cylinder head, the oil filter housing, the rocker cover and liquid gaskets. Order quickly and cheaply now.

Sump gaskets

A sump gasket is the seal between the engine and the sump. The seal prevents any leaks from the sump. The sump collects excess engine oil when the car is stationary. It is, of course, not intended for this oil to leak. Therefore, the connection is tightly sealed with a sump gasket. Have you noticed an oil leak? Then check whether the sump gasket needs replacing. At Winparts, you will find the right sump gasket for your car. Enter your registration number or car details on the website and find the right products for you!

61 - 80 / 1035 Products

Filter

0 filters selected