2-DIN mounting kit
Many car manufacturers install their own vehicle-specific radios that are visually matched to the center console.
For this reason, you will need a suitable mounting panel to replace the standard 1-DIN or 2-DIN radio.
In addition, vehicle-specific radio connection cables, antenna adapters, steering wheel control interfaces,
camera adapters and active system adapters are required.
For more information, please contact our technical helpdesk.
Suitable for the following vehicles:
Porsche Panamera 2009-2016
Remark:
Vehicles with remote control on the steering wheel
CAN bus
Connection: 40 pin Quadlock Porsche plug
Connection: Fakra (m)> DIN (m)
Connection: Cynch yellow> camera input
Connection: Cynch red/white> AUX input
Connection: Cynch red/white > OEM sound system (no fader)
Connection: LVDS ochre> USB input
Vehicles with PCM 3.1 OEM device
Vehicles with OEM MOST amplifier
Vehicles without Burmester 3D High End Surround OEM sound system
blue/white: +12V switched amplifier remote
To access the menu settings, connect the switch wire (purple/white)
To visualize the menu settings, connect the rear view camera input (cynch) and configure it
The following signals are available:
Inflammation
Relief
Reverse gear
Speed pulse
Handbrake signal
Steering wheel controls
Visualization of optical PDC
Sound reproduction PDC
Scope of delivery:
2-DIN RB Porsche Panamera 2009-2016 black: 381323-08-1
Info adapter Porsche 911 / Cayenne / Macan / Panamera Amp: 43upo01
LFB ACV cable> Multilead various devices: 42ctmultilead
Antenna adapter Fakra (m)> DIN (m): 1520-01
Antenna adapter Fakra (m) (double)> DIN (m) 12V Phantom: 1524-77
USB adapter Porsche various vehicles
Suitable for: Porsche Panamera 2009-2016
| Colour | Black |
| application | Ready |
| format | 2-DIN |
| Warranty | 2 years |