Buy Quality Battery Clamps at Winparts Today

Battery clamps corroded

The battery clamps will rust or corrode over time. Rust and corrosion are a reaction of the battery clamps and the conductors in contact with each other. It is therefore important to check the battery clamps about twice a year and to clean them with anti-rust. If there is too much corrosion or rust on the clamps, it will cause the battery to malfunction. When the battery no longer works properly, you can no longer start the car, which is of course very annoying. In this case the battery clamps will have to be replaced.

Connect battery clamps

When connecting the new battery clamps, it is important that the battery terminals are clean. You can smear the terminals with Vaseline to prevent premature corrosion. With modern batteries where the poles are closed, this is not necessary. The battery has a minus and plus terminal. Make sure you connect the correct clamp to the correct battery terminal. Incorrect connection can cause malfunctions in the electrical circuit. First connect the red clamp to the positive terminal. The other (often black or blue) terminal can then be connected to the negative terminal. When the car does not start, jumper cables or battery chargers are connected to the battery clamps.

Buy battery clamps

You can easily find the right battery clamps for your vehicle with your number plate or car model. You can easily enter these on the website. The correct car parts will then be displayed. Are you looking for other parts for the electrical circuit? Toggle switches, relays, fuses and cables & connectors can also be found in our wide range!

Battery terminal

The battery clamps ensure that the car battery and the power cables are in contact with each other. Not being able to start the car is a common problem. In many cases this is caused by corrosion or rust on the terminals of the battery. In this case it is important to replace these clamps. This ensures that the car battery is in good condition again and that the car and electrical equipment work properly again. At Winparts you will easily find the suitable clamps for your car battery with your number plate or car model. Fill this in on the website and the correct car parts will then be displayed.

61 - 67 / 67 Products

Filter

0 filters selected

Block view
List view

Battery/battery terminal clamp

Material: Brass
Fitting Position: Left (passenger side)
Colour: Grey
Surface: Tin-plated
Shape: A-shape
Quantity: 25
Connector / Clamp: With pole screw that can be mounted on one side
Voltage from [V]: 12
Warranty: 2 years
Voltage up [V]: 24
Battery Clamp Version: Cast workpiece
Battery Clamp Version: For plus pole
Assy./disassy. by qualified personnel required!
Battery pole diameter (mm): 17,5
Cross section [mm²] up to: 70
Pressure plate design (battery terminal clamp): Smooth
According to DIN standards (battery terminals): DIN 72332-1 (solder terminals)