Brake hoses: Buy Quality Parts at Winparts Now

Brake hose worn

A brake hose can become worn because it is connected to moving parts, such as the wheel suspension. The hose comes into contact with these moving parts and can wear and dry out as a result. A worn brake hose will leak. So there is a good chance that there will be a puddle of brake fluid under the car. You can also recognize a worn hose by the reduced braking power of the car. This is because when there is no longer enough brake fluid transported to the braking system, the braking power will decrease. It is very important to check the braking system regularly. Are the brake lines or brake hoses worn out? These must be replaced as soon as possible to prevent unsafe situations. A reduced braking power results in a longer braking distance.

Replace brake hose

Replacing the brake hoses is a relatively simple job and you can do it yourself. Before replacing the brake hoses, you will first have to drain the brake fluid. It is therefore useful to have a container ready under the work area, so that the brake fluid is neatly collected. You can now disconnect the brake hose from the wheel brake cylinder and the brake caliper. The new hose can then be placed. Make sure you take enough time to place the brake hose correctly, it should not be twisted. The brake fluid cannot flow freely when the brake hose is twisted or seated. After replacing the brake hose, you must bleed the brake system so that no air remains in the pipes.

Buy brake hoses

You can easily find the right brake hoses for your vehicle with your license plate or car model. You can easily enter these on the website, the suitable car parts will then be displayed. Are you looking for brake discs, brake pads, brake disc screws or brake calipers? These can also be found in our wide range!

Brake hose

Along with the brake line, the car's brake hose ensures that the brake fluid is transported to the braking system. When the brake pedal is pressed, this system is activated and ensures that the car can slow down. Do you notice that the braking power is reduced or have you identified a leak? Then the brake hoses could be worn out. At Winparts you will find brake hoses from top brands such as Febi, ABS and Blue print. Simply enter your license plate or select the car model on the site and the correct parts will then be displayed.

11081 - 11100 / 11457 Products

Filter

0 filters selected

Block view
List view

Brake hose

Fitting Position: Front Axle
Thread Measurement 1: M10x1
Thread Measurement 2: BANJO
Warranty: 2 years
Type: Brake hose loose
Thread Type: Inner Thread
Component Number: BSG 16-730-001
Length [mm]: 432
Diameter 2 (mm): 10