Oil pan
Material: Steel
Supplementary Article/Info 2: With bore for oil-level sensor
Warranty: 2 years
or .
The sump, or oil pan, is located at the bottom of the crankcase and cools the engine oil. Its position on the underside of the car makes it susceptible to damage if you hit a bump in the road. This is especially risky for lowered cars.
The sump on your car is often made of aluminium or sheet steel and is sometimes protected by a piece of plastic. Moisture and wear and tear can cause the sump to leak. This results in an oil stain under your car and will quickly become noticeable. If the sump is leaking oil, it will result in an MOT failure and is also harmful to your car and bad for the environment.
Material: Steel
Supplementary Article/Info 2: With bore for oil-level sensor
Warranty: 2 years
Material: Steel
Supplementary Article/Info 2: With bore for oil-level sensor
Warranty: 2 years
Production date from: 11.1986
Production date to: 02.2003
Material: Steel
Supplementary Article/Info 2: Without oil pan gasket
Supplementary Article/Info 2: With seal
Surface: Stoved
Supplementary Article/Supplementary Info: With oil drain screw
Section: Lower Section
See accessories list for additionally required parts
Oil pan material: Sheet Steel
Packaging width [cm]: 21,3
Packaging height [cm]: 8,3
Observe the vehicle manufacturer specifications
Warranty: 2 years
Production date from: 03.2013
Production date to: 08.2021
Length [mm]: 215
Height [mm]: 38
Width [mm]: 220
Observe system fill quantity
Supplementary Article/Info 2: With bore for oil-level sensor
Supplementary Article/Info 2: Without sensor
Section: Lower Section
Oil pan material: Aluminium
Warranty: 2 years
Observe system fill quantity
Supplementary Article/Supplementary Info: Without gasket / seal
Warranty: 2 years
Supplementary Article/Info 2: Without bore for oil level sensor
Oil pan material: Aluminium
Warranty: 2 years
Supplementary Article/Info 2: With bore for oil-level sensor
Oil pan material: Aluminium
Warranty: 2 years
Component Number: BSG 90-160-008
Material: Steel
Warranty: 2 years
Production date from: 01.2007
Supplementary Article/Info 2: With oil pan gasket
Supplementary Article/Supplementary Info: With oil drain screw
For OE number: 06 52 171 S1
Oil pan material: Cast Aluminium
Warranty: 3 years
Application: Crankcase gasket
Packing material: NBR (nitrile butadiene rubber)
Weight [kg]: 3,230
Supplementary Article/Info 2: With seal
Supplementary Article/Info 2: With bore for oil-level sensor
Supplementary Article/Supplementary Info: With oil drain screw
Oil pan material: Aluminium
Consult accessories list for recommended additional repairs
Warranty: 2 years
Material: Steel
Supplementary Article/Supplementary Info: Without gasket / seal
Warranty: 2 years
Material: Aluminium
Warranty: 2 years
Production date from: 09.1999
Production date to: 07.2010
Supplementary Article/Info 2: With seal
Spanner Size: 19
Supplementary Article/Supplementary Info: With oil drain screw
Warranty: 2 years
Length [mm]: 418
External Thread Size: M14 x 1,5
Material: Steel
Warranty: 2 years
Production date from: 01.2000
Production date to: 08.2014
Material: Steel
Section: Lower Section
Warranty: 2 years
Production date from: 07.1995
Production date to: 06.2006
Material: Steel
Warranty: 2 years
Production date from: 05.1991
Production date to: 12.2000
Material: Aluminium
Supplementary Article/Info 2: With bore for oil-level sensor
Warranty: 2 years
Production date from: 03.1999
Production date to: 03.2010
Supplementary Article/Info 2: With seal
Spanner Size: 12
Supplementary Article/Supplementary Info: With oil drain screw
Oil pan material: Sheet Steel
Warranty: 2 years
Length [mm]: 459
External Thread Size: M10
Surface: Painted black
Surface: KTL coating (cathodic dipping paint)
Section: Lower Section
Oil pan material: Sheet Steel
Warranty: 2 years
Observe system fill quantity
Material: Aluminium
Warranty: 2 years