oil pan
Supplementary Article/Info 2: With seal
Spanner Size: 19
Supplementary Article/Supplementary Info: With oil drain screw
Warranty: 2 years
Length [mm]: 430
External Thread Size: M14 x 1,5
or .
The sump, or oil pan, is located at the bottom of the crankcase and cools the engine oil. Its position on the underside of the car makes it susceptible to damage if you hit a bump in the road. This is especially risky for lowered cars.
The sump on your car is often made of aluminium or sheet steel and is sometimes protected by a piece of plastic. Moisture and wear and tear can cause the sump to leak. This results in an oil stain under your car and will quickly become noticeable. If the sump is leaking oil, it will result in an MOT failure and is also harmful to your car and bad for the environment.
Supplementary Article/Info 2: With seal
Spanner Size: 19
Supplementary Article/Supplementary Info: With oil drain screw
Warranty: 2 years
Length [mm]: 430
External Thread Size: M14 x 1,5
Material: Aluminium
Warranty: 2 years
Production date from: 10.1998
Material: Steel
Supplementary Article/Supplementary Info: Without gasket / seal
Warranty: 2 years
Material: Steel
Section: Lower Section
Warranty: 2 years
Production date from: 02.2006
Production date to: 07.2019
Material: Steel
Supplementary Article/Info 2: With bore for oil-level sensor
Warranty: 2 years
Material: Aluminium
Supplementary Article/Info 2: With bore for oil-level sensor
Warranty: 2 years
Production date from: 01.1998
Production date to: 09.2010
Material: Steel
Section: Lower Section
Warranty: 2 years
Production date from: 07.1995
Production date to: 06.2006
Material: Aluminium
Warranty: 2 years
Production date from: 11.1994
Production date to: 05.2005
Material: Steel
Supplementary Article/Info 2: With bore for oil-level sensor
Warranty: 2 years
Production date from: 06.2004
Production date to: 10.2013
Material: Aluminium
Supplementary Article/Info 2: With bore for oil-level sensor
Warranty: 2 years
Production date from: 11.2000
Production date to: 03.2009
Material: Steel
Warranty: 2 years
Material: Aluminium
Supplementary Article/Supplementary Info: Without gasket / seal
Warranty: 2 years
Supplementary Article/Info 2: With oil pan gasket
Supplementary Article/Supplementary Info: With oil drain screw
For OE number: 06 52 171 S1
Oil pan material: Cast Aluminium
Warranty: 3 years
Application: Crankcase gasket
Packing material: NBR (nitrile butadiene rubber)
Weight [kg]: 3,230
Supplementary Article/Supplementary Info: Without gasket / seal
Section: Lower Section
Warranty: 2 years
Oil pan material: Plastic
Warranty: 2 years
Always compare old and new part (in particular OE No.)
Material: Aluminium
Supplementary Article/Info 2: Without bore for oil level sensor
Warranty: 2 years
Production date from: 03.1995
Production date to: 12.2010
Supplementary Article/Info 2: With bore for oil-level sensor
Supplementary Article/Info 2: With seal
Supplementary Article/Supplementary Info: With oil drain screw
Additionally required parts: Sealant
Oil pan material: Cast Aluminium
Warranty: 2 years
Length [mm]: 456
Additionally recommended article: Mounting Kit
External Thread Size: M12 x 1,5
Supplementary Article/Info 2: Without bore for oil level sensor
Section: Lower Section
Oil pan material: Aluminium
Warranty: 2 years
Supplementary Article/Info 2: With bore for oil-level sensor
Supplementary Article/Info 2: Without sensor
Oil pan material: Aluminium
Warranty: 2 years
Observe system fill quantity
Supplementary Article/Info 2: Without bore for oil level sensor
Oil pan material: Aluminium
Warranty: 2 years